Kade Mini Arcade PCB

Post Reply
User avatar
sharpfork
poster
Posts: 708
Joined: Sat Sep 15, 2012 8:46 pm

Kade Mini Arcade PCB

Post by sharpfork » Sun Jan 20, 2013 4:44 am

This is the final preproduction protype of the limited edition KickStarter that is being fabricated by http://oshpark.com/
Image

User avatar
sharpfork
poster
Posts: 708
Joined: Sat Sep 15, 2012 8:46 pm

Re: Kade Mini Arcade PCB

Post by sharpfork » Sun Mar 03, 2013 1:35 am


retrodd
poster
Posts: 1
Joined: Sat Sep 21, 2013 7:23 pm

Re: Kade Mini Arcade PCB

Post by retrodd » Sat Sep 21, 2013 7:31 pm

Hi,

If the KADE is available for reseller, please contact me. I'll buy at least 10 pcs for my shop.
www.retogamer.ch/shop
i ship only in switzerland

thanks

regards
daniel

peynir
poster
Posts: 1
Joined: Mon Jan 27, 2014 9:28 pm

Re: Kade Mini Arcade PCB

Post by peynir » Mon Jan 27, 2014 11:37 pm

@sharpfork, this is an interesting device and a great idea. Instead of using the ports that you’ve used, wouldn’t it have been easier for the customer if you could give like a connector which could be used so that all the wires don’t have to plugged in so close to the open circuitry. This is a great project which would fit in one of my designs perfectly but I’ll have to make some modifications to it. Hope that wouldn’t be an issue.

User avatar
PL1
poster
Posts: 663
Joined: Tue Oct 30, 2012 5:20 am
Location: Omaha, NE

Re: Kade Mini Arcade PCB

Post by PL1 » Fri Jan 31, 2014 1:27 am

Not quite sure what you mean by "all the wires don’t have to plugged in so close to the open circuitry".

What type of configuration do you need, Peynir?

Maybe something like the Xin-Mo encoder harness?
Image


Scott

Post Reply